| Dinosaur Electronics |
||
| Direct Replacement Boards for Onan® Chart |
| ONAN® Model # | SPEC | DinosaurPart # for original |
Dinosaur Part # with 3950 or 3951 kit installed | |
| (Emerald) | BGE | A-E | 300-2784/2943 | |
| BGEL | B-D | 300-2784/2943 | ||
| BGE/BGEL | E-G ** | 300-3056/3687 | 300-3763 | |
| BGE/BGEL | H-M | 300-3763 | ||
| (Marquis) | BGM | A ** | 300-3056/3687 | 300-3763 |
| CCK | A-U | 300C859 | ||
| NH-RV | A-D | 300C859 | ||
| (Power Drawer) | NH | ----- | 300-1073/4950 | |
| A-C ** | 300-3056/3687* | 300-3763 | ||
| NHD | ||||
| NHD | D-H | 300-3763 | ||
| NHEL | A-C | 300-2784/2943 | 300-3763 | |
| NHEL | D-G ** | 300-3056/3687 | ||
| NHEL | H | 300-3763 | ||
| NHM | A ** | 300-3056/3687 | 300-3763 | |
| * Cut and remove W1 jumper on our board | ||||
| ** These models where originally produced with the 300-3056 board, wich was discontinued and replaced by the 300-3687 board. The 300-3687 board was discontinued and replaced by the 300-3950 kit, or the 300-3951 kit, which consists of a 300-3763-0? board and a wire harness. You must use the part # of the board that is in the generator to order the proper Dinosaur replacement board. | ||||